A request for the Fixed Steam Cleaning Machine PowerDe HW02 is easier to answer when you describe the application as it actually runs on your site. The machine's configuration, accessories, and commissioning plan should follow from your workload, layout, utilities, and cleaning tasks. Use the details below as an enquiry checklist.
Where the machine will be installed
Give the working area: service bay, fuel station forecourt, indoor garage, parking facility, or another vehicle-cleaning location. Include the available floor space and access route. The HW02 frame measures 1,200 × 800 × 1,200 mm including handles, so the placement affects operator movement, hose routing, and separation from customer traffic. Explain how far the unit is from the water inlet and drainage, because long hose runs can make a fixed installation awkward in a busy bay.
Vehicle workload and cleaning tasks
The HW02 page describes vehicle exterior cleaning at gas stations and parking lots, interior vacuuming and disinfection, and engine-compartment cleaning. Tell the manufacturer which of these tasks you need, the number of vehicles handled per shift, and how frequently heavier work such as engine cleaning is performed. A site mainly refreshing exterior panels between services has a different duty pattern from a workshop cleaning engine compartments daily. If you also clean vans, buses, or other fleet vehicles, say so, because commercial steam cleaning equipment selections change with vehicle size and turnaround time.
Electrical and water supply
The product page lists 220 V working voltage, 6 kW heating power, and a tap-water inlet with a 4-point internal-tooth joint (1/2 inch). Send the supplier your circuit capacity, socket type, distance to the panel, and any limits on continuous operation. If the supply is shared with other equipment, ask for confirmation before delivery. Include water pressure or quality concerns, because inlet conditions affect preparation work and the commissioning checks.
Operating mode and the protections you need explained
The HW02 switches between dry and wet steam and is listed with leakage, short-circuit, high-temperature, high-voltage, and water-shortage protection. Describe the surfaces you clean and the settings your operators expect to use. For public areas, explain your safety rules and ask how each protection is verified during commissioning and which checks your own team can carry out during routine maintenance.
Service, training, and purchasing terms
State the quantity, target delivery date, and whether you need operator training, spare parts, or extended support. If several locations will receive machines, provide each address and note any company standards that the installation must meet. When comparing a fixed unit with a mobile option in the PowerDe cleaning equipment range, include whether vehicles are brought to one point or staff move between bays.
A concise enquiry format that works
Put the site location, floor space, utilities, vehicle volume, required tasks, steam mode, accessories, and support expectations in one short message. That information lets the manufacturer confirm whether the 220V steam cleaning machine fits your application and gives you a clear basis for comparing quotations on the same terms.
