The product page for the PowerDe PWD01 steam cleaner keeps its application statement short and practical: a mobile active-water cleaning machine offering dry steam, wet steam and hot water modes, intended mainly for indoor garages and the narrow spaces found in outdoor parking lots. That one sentence points to a specific type of buyer. If your site is a parking facility, an indoor garage or a vehicle service area with limited maneuvering room, the same page also lists the specifications that decide whether the machine fits your workflow and your utilities.
What the product page states about the machine
The PWD01 is described as a driving-style, autonomous-driving mobile unit. You can drive it to the work area and stop it where the cleaning has to happen, which matters in a parking structure where a fixed hose run would leave parts of the floor out of reach. The page gives machine dimensions of L2500 mm × W900 mm × H1050 mm, which is the first number to check against your ramps, columns and aisle widths.
Under the cleaning side, the listed specifications read 4.5 kW heating power with a PTC semiconductor heater, an 80 L clean water tank with tap-water inlet (4-point internal-tooth joint), and a high-pressure water gun with nozzle as the cleaning method. A vacuum cleaner with a flat nozzle and a sewage tank are listed under the vacuum suction method. Working voltage is 48 V from a mobile battery, and the page notes that the batteries are customer provided — the product is sold in a variant without battery and in a variant including battery, so confirm which one you are quoting before you plan chargers and spare packs.
The three modes and what each one is for
Hot water mode works on loosened soil on floors and hard surfaces, where volume of water and pressure do the work. Wet steam adds heat and steam to the same wet application, which is what you want on oily or sticky deposits that cold water leaves behind. Dry steam delivers high-temperature vapour with very little free water, so surfaces stay near usable condition after the pass — an advantage in a shared garage or a service bay that cannot be closed for drying.
A machine that switches between the three modes lets one operator cover several tasks in one shift instead of pulling two sets of equipment out of storage. If mode coverage is the deciding factor for you, compare the PowerDe cleaning equipment series, where the driving-style PWD02 and HMW2 units carry the same three-mode design in different sizes.
Safety items the page lists for indoor use
Indoor garages and parking structures combine water, electricity and confined driving space, so the protection features on the page are worth reading as a checklist. The PWD01 lists leakage protection, short-circuit protection, high-temperature protection, high-voltage protection, water-shortage protection and high-voltage explosion-proof design, together with the PTC semiconductor heater. Ask the manufacturer which standards your local electrical inspection applies to, and confirm the protection wording for the exact variant you order.
How to match the machine to your site
- Measure the narrowest aisle, ramp and door on your route. The published 2500 × 900 × 1050 mm envelope must pass through all of them, including the handles.
- Confirm a tap-water point at 4-point internal-tooth fitting, and confirm where the sewage tank is emptied and rinsed.
- Check that your facility supplies a 48 V mobile battery and charger compatible with the machine, or order the variant that includes the battery.
- Match the mode you use most to the job: hot water for floors, wet steam for oily deposits, dry steam where drying time is the constraint.
For a facility that needs a stationary high-power unit instead of a mobile one, the fixed high-pressure steam cleaning machine in the same series is listed at 220 V with 6 kW heating power and an 80 L SUS304 tank, and its page describes vehicle exterior cleaning at gas stations and parking lots, interior work and engine-compartment cleaning. Comparing the fixed and driving-style pages side by side is the quickest way to decide whether you are buying mobility or fixed capacity.
Questions to send with your inquiry
The product page publishes dimensions, heating power, tank volume, water inlet and working voltage. It does not publish steam temperature, steam pressure, battery capacity, run time, weight, hose and wand lengths or the accessory list for the PWD01. Put those items in your inquiry, along with your floor area, the number of cleaning shifts per week and the soils you are removing. Shenzhen PowerDe Automation Precision Equipment Co., Ltd. lists customized configurations and technical support among its capabilities, so send the site conditions with the request rather than only the model number.
If you want the wider picture before you pick a model, start from the intelligent cleaning equipment manufacturer page and the cleaning category, then request a written specification sheet for the exact variant. Confirming voltage, battery supply and inlet fitting in writing is the step that prevents most installation surprises on mobile cleaning equipment.
